IKV-FLUOR TA 3H
IKV-FLUOR TA 3H is a cost-effective tyre mould lubricant for segmented tyre moulds.
Tyre manufacturers found in testing that IKV-FLUOR TA 3H is a cost-effective long-term lubricant for its tyre moulds.
IKV-FLUOR TA 3H demonstrated continued excellent performance. It can be used on all types of segmented moulds (steam heated and electrically heated) and all types of sliding metal surfaces. Its color is white and very distinguishable, leading to efficient and complete coverage of metal surfaces and easily preventing inadvertent and unnoticed contamination of tyres.
Advantages of using IKV FLUOR TA 3H GREASE:
Application Methods
Initial applications for cleaned segment: apply with a clean brush or auto body putty knife.
Subsequent applications apply with a clean brush, auto body putty knife or paint roller (20mm OD X 80mm to 100mm wide of a short hair nap).
Some plants use an air gun with our 500g cartridges as an applicator.
FEATURES AND BENEFITS
Characteristic | Performance |
Base Oil Nature | Perfluorinated |
Thickener | PTFE |
Base Oil viscosity at 40° | 500 cSt |
Colour | White |
NLGI Grade | 3 |
Density at 20° | 2.003 |
Worked Penetration | 220/250 x 0.1mm |
Drop Point | Without °C |
Max speed factor | 300 000 n x mm |
Volatility (22h at 204°C) | <2 wt % loss |
Service temperature |
-30 to +260°C 300°C |
IKV-FLUORE TA 3H