Application Requirement

• Outstanding lubricant at low speeds
• Resistant to high temperatures (200 - 240°C)
• NSF H1 registered
• Competitively priced
• Resistant to washout
• Reliable supply
• Competent technical support

Our technical team proposed the following solutions.

IKV FLUOR MPA 2H is a non-flammable PFPE grease developed from a fluorinated oil, tetrafluoroethylene telomeres and anticorrosion additives. This grease provides an extraordinary combination of high performance properties which include:

• Outstanding oxidation resistance
• Excellent high temperature stability
• Excellent lubrication properties
• Compatibility with metals, plastics and elastomers

IKV FLUOR MPA 2H is suitable for the lubrication of all bearings, or components subjected to extreme temperatures or to aggressive environments where conventional lubricants would not cope. It is especially designed for the lubrication of ovens, drying, stabilisation or polymerisation ovens in the food, glass, textile, plastic film, paint, chemical, nuclear, robotic and packaging industries.

IKV-FLUOR MPA 2H is a PFPE / PTFE grease that is based upon a very high viscosity, extremely thermally stable PFPE oil, thickened with high grade PTFE and with the addition of a special corrosion inhibitor. The product is totally non-toxic and includes only FDA approved ingredients as required for NSF H1 approval for use in the food industry.
The long life and exceptional stability of these greases allows maximum life with long periods between lubrication intervals.
IKV-FLUOR MPA 2H can often extend re-lubrication intervals over competitors PFPE based greases and is available in a wide range of packs and sizes. The most popular pack is the 800g grease cartridge but 600g cartridges, 500g tubs, 1kg tubs, 10kg kegs, 25kg kegs, 40kg kegs are also available.

---

ZAROX C-2005 is a non-flammable white grease developed from a perfluoroalkyl-polyether-type oil, a micronised PTFE as thickener and an anti-corrosion additive. It is totally inert physically and chemically in the event of aggression by all kinds of liquid or gaseous products (except for fluorinated solvents) and
thermal and ionising radiation.
ZAROX C-2005 is also compatible with all widely used elastomers, seals, gaskets, plastics and metals. But it is because of this infinite range and variety of polymer combinations and variations in the final formulation that it is usually up to the end user to decide if further compatibility testing is required before making any decision about future use in a new application or with a new material.
ZAROX C-2005 is formulated exclusively using components that appear in the positive list of the Food and Drugs Administration (FDA) and is registered according to National Sanitary Foundation NSF H-1 standard.

ZAROX C-2005 is suitable for the lubrication of all bearings, sliding bearings or joints subjected to extreme temperatures or to aggressive conditions capable of altering conventional lubricants. It is used principally for curing ovens in glass, textile, plastic film, paint, chemical, nuclear, and corrugated card industries.
ZAROX C-2005 is equally adapted for the lubrication in thin films of sliding electrical contactsor as dielectric agents.